My father asked me to clean up his old pc from 2010. There was what seemed to be pop spilled all over the back of the GPU. IPA didn't touch it so I ran it under the sink to clean it.

I did after running it under the tap soak it in IPA to try and push out all the water. Then dried it with a hair dryer on low. Threw it back into the pc and booted up fine.

The amount of dust was also nasty but that's not relavent for this sub.

This might be the worst intentionally destroyed Chromebook I’ve seen while working at the high school. At least there wasn’t a “Fixable?” Ticket attached this time.

I got tired of the glass, so I took them off.

I have so many questions

Getting into console repair and this was the first ps4 Ive ever cracked open. Offered to try to fix it for my friend and all it took was a fresh reinstall. Told him the fan sounded a little crunchy and that’d clean it out for him haha. The heat shields have basically disintegrated. This should be interesting.

for the morbidly curious: i made a poorly put together video documenting the cleaning process and such

https://youtu.be/JhSjC6khgtM?is=XyR7_EXCg2M0mRxV

The NM cable caught my eye, but the network cable takes the cake

The monitor doesn't provide enough light on its own

The USB 5V and GND go to the 5.5 mm barrel. D- and D+ go to the RCA cable conductors. This is analog on a USB A connector.

2/3rds of a big metal dog bowel of the sweet stuff, two very tired hands, and a well petted dog. Been a fine day.

So I posted in the Windows help sub yesterday asking for assistance with a troublesome Wi-Fi card and device manager problems. Turns out, the issue resolved itself. Device = managed. 🙃🫠

😭

Usually, when MOST people leave the company, the mouse might have some wear and tear on the buttons, but is overall in decent shape. Sometimes, they look horrifying like in the above pictures. What is it??? 🤮

He swears that it was IMPOSSIBLE to fit it so he had to do it​​

Case: chest tgm​

Gpu: RTX 4070​

Edit: more "finished" pics

https://imgur.com/a/i5EEvpS​

edit 2​ after

Ok ive got some more pictures and fixed as much as i can, ofc my friend said it wasnt possible and i did first time no effort xD​​

https://imgur.com/a/zocNeWS

This is as clean as it will come! Could only get it this way by using a spudger with the grain (yes it has grain) and then isopropyl and then acetone... it's from a 170HX so not a cheap manufacturing issue... Gonna try giving it just a little sanding and see if that helps...

Mostly from T16 Gen 1's

We had a couple of HP workstations that were essentially unusable, with the CPU permanently throttled to 1 GHz. Time to change the thermal paste. And the CPU. And the CPU cooler.
The machines were out of warranty, yet HP agreed to replace all the components. Kudos to them.