I decided to pull the trigger and pre-order the ‘GoBiggeR, Pillbug 2.0, Fidget Spread’ and have been wondering about how it would look to have some tritium vials with it. I’ve not used them before but they look very cool and it’s just the look I would love to spin with. Has anyone any advice on the best colour combinations or setups at all as the Pillbug 2.0 can take up to 42 vials. Any feedback would be much appreciated so thanks in advance 👍😊

M3 Metal Creations ==FBX Dyad in brass

I’ve finished an interesting commission for an exhibition themed around Vikings and Norse mythology. Timascus and titanium. :) And, of course, Yggdrasil and runes. ;)

Helpful hint: If your question can be stated in 1-2 sentences, it probably should be posted here.

Examples of questions that should go in this thread:

• "I live in (insert country here). Where can I buy spinners/bearings/caps/etc?"

• "Looking to buy my first spinner. What should I get?"

• "What do you recommend for a spinner that's under $____?"

• "I'm trying to choose between Brand 1 and Brand 2, which should I get?"

• "Has anyone purchased from Seller _______ before?"

• "Where can I buy bearings/bearing caps?"

• "What kind of bearing is this?"

• "Where can I buy (Brand) spinner?"

Also, please check the sidebar for resources before making a post. 95% of the questions that are asked have been asked before or have been addressed. Seeing the same questions pop up over and over again make everyone cranky.

Previous megathreads can be viewed here.

Note: Approved sellers/makers are permitted to link their store in any thread as they wish as outlined in the advertising rules thread. Please report abuse of advertising privileges and/or very obnoxious advertising habits to the moderators.

Mi primer spinner, se que es muy básico pero me gusta bastante el peso qué tiene, el frio qué transmite el metal y la suavidad y velocidad qué tiene al girar.

This thing is crazy cool and it’s one of my favorites. It came in this prescription bottle (written by Dr. Nick). I don’t remember how and when I got it or how much I paid for it. It is obviously made by “full throttle” based on the label……but i don’t think that there are too many of these out there.

The SS XL Rose welcomed a Cu Collison and W Tri Horizon to the family this weekend with a little dip in ocean and a great sunset. I will say, if you want to patina your copper,just take it to the beach. I opened it brand new polished straight from KAP Thursday night, gave it a couple trial spins, then packed it away for the trip and by the time it had been out of the car at the beach for an hour (not ON the beach or at the water mind you, just at the house a few blocks away) it was already showing purple patina coming in strong. Then, at sunset on Sunday this is how far it had come after only being in a case at the water for maybe an hour, open at the water for 5 minutes to get a pic, spun in the house at night a bit and resting in the case at the house the rest of the time. I love it! The W Tri Horizon was my first tungsten and got me hooked so quick that I had another ordered before I went to bed Friday, highly recommend!

Hi guys, I’ve recently become obsessed with the world of fidgets and spinners. I purchased a Zaclabs rotten banana spinner and loved it so much I went straight to the top and bought two KAP spinners. A tungsten Tri Horizon and a standard Horizon.

In a YouTube video I watched it was mentioned they don’t have the best buttons and he had replaced his.

Please can you recommend the best buttons for a heavy KAP Spinner and also bearing which I know is subjective?

Many thanks

Helpful hint: If your question can be stated in 1-2 sentences, it probably should be posted here.

Examples of questions that should go in this thread:

• "I live in (insert country here). Where can I buy spinners/bearings/caps/etc?"

• "Looking to buy my first spinner. What should I get?"

• "What do you recommend for a spinner that's under $____?"

• "I'm trying to choose between Brand 1 and Brand 2, which should I get?"

• "Has anyone purchased from Seller _______ before?"

• "Where can I buy bearings/bearing caps?"

• "What kind of bearing is this?"

• "Where can I buy (Brand) spinner?"

Also, please check the sidebar for resources before making a post. 95% of the questions that are asked have been asked before or have been addressed. Seeing the same questions pop up over and over again make everyone cranky.

Previous megathreads can be viewed here.

Note: Approved sellers/makers are permitted to link their store in any thread as they wish as outlined in the advertising rules thread. Please report abuse of advertising privileges and/or very obnoxious advertising habits to the moderators.

Hey all. I have a pretty decent collection of fidget spinners and I want to sell some of them because I don't really use them anymore. Most of my collection is "high end" but I also have a handful of "mid-level" spinners as well. All of them have been treated very well and are in excellent condition. I have the boxes and certificates of authentication for most of them as well.

I typically use ebay for selling everything. But when I look at ebay, there is little to no activity on fidget spinner sales these days. I am new to this forum and I was looking for the rules on BST (they are supposedly in the sidebar) but I can't find them. (I hope that I am not violating the rules by making this post!?!?!)

At any rate.........my question is.......what's the best way to go about selling these? eBay? A different site? This forum? A different forum? Etc....

I have added a pic to grab your attention (it worked!!)

Left: Damascus Rotablade Tri-Stubby with Focusworks Zirc buttons.

Right: Copper Rotablade tri-Stubby with some superconductor style buttons

This thing is incredible. Not bad for my first fidget spinner. I’m glad I went with this over the Machinarium X, although I’m sure I would have been happy either way. The attention to detail of this spinner is insanely impressive. You can literally feel the quality of this small chunk of metal!

I'm looking for something pretty basic but only in stainless steel, sturdy and loooooooong spinning. Just stainless steel and no plastics.

Budget can go up to 100-200€ if need be.

Big thanks for all comments and advice!

TL;DR Just got my first W spinner last night (KAP regular size tri horizon) and now NEED another. Trying to decide between a mini bar cell or mega bar horizon. Please help me! Other W bar suggestions are also welcome, would just like them to be available to order!

I just received my first tungsten spinner last night, a KAP regular size tri horizon (planning to post up some pics when I get a chance later today). I absolutely love it! Now I'm about to buy another. I love the tri horizon, the weight is amazing and it has really nice inertia, but it's so we'll balanced that now I want to get a tungsten bar for a little extra fight when I move it around. I really would like to get a full size bar cell, but unfortunately I am irresponsibly impulsive and I don't see any full size tungsten bar cells available anywhere right now and I will likely place an order before I go to sleep tonight. So, now I'm deciding between a mini bar cell or a mega bar horizon. I'm leaning towards the mega horizon, but since I already have the regular tri horizon I'm wondering if I should go for the mini cell to have something different. In anything I collect I try to never get two of the same thing that are only separated by color/brand/etc., there has to be something unique about each piece. I feel like the difference between a regular size tri horizon and a mega bar horizon is big enough to warrant owning both, and I'm a bit concerned that I'll be a little disappointed with the size of the mini bar cell since I have really been wanting a full size one (when ordering the Horizon I also picked up a copper full size Collision and the plan was to get a bar cell next in a more standard material, just didn't realize the tungsten would pull me in so hard). So, please, give me your opinions! Mini bar cell, mega bar horizon, or a different tungsten bar spinner you can recommend (that is actually available right now)?